News Get a Quote

Home -

YueFeng Aluminium Technology Co., Ltd News

Cost Reduction and Efficiency Improvement: 7 Major Misconceptions about Cost Reduction in Manufacturing - Have You Fallen into Any of Them?

Cost reduction is an eternal theme in business operations, but this issue is now extremely important and urgent, especially for China's manufacturing industry which has entered an era of meager profits. According to relevant reports, if the manufacturing cost in the United States is set at 1, China...

August 22, 2025
Introduction to the second phase of 7055 alloy

The as-cast structure of 7055 aluminum alloy is composed of matrix grains and uniformly distributed second-phase particles, among which the second-phase is mainly distributed in a network pattern at the grain boundaries (Figure 1). After high-temperature (350-500℃) and long-term (6-24 hours) ...

August 22, 2025
Principles and Influences of Regulating the Casting Speed of Aluminum Alloy ingots

This article focuses on the regulation of the casting speed of ingots and expounds the basic principles of regulating the casting speed of ingots, that is, under the premise of ensuring that the quality of ingots meets the technical conditions and the yield rate, the casting speed should be ...

August 22, 2025
What are the differences between porosity and porosity in aluminum alloy casting and how to avoid them

I. The Difference between Porosity and Pores Defect characteristics Porosity is a fine and scattered porous defect, while porosity is a spherical porous defect with a smooth inner surface. From the perspective of appearance and form, the loose holes are distributed rather scattered and have no ...

August 22, 2025
Why is it necessary to strengthen the production management of aluminum slag treatment?

The aluminum slag produced during the casting process, although a waste material, contains recyclable metals and oxide residues. In order to generate reasonable benefits from the energy retention of recyclable metal utilization, it is necessary to strengthen management: (1) The aluminum slag ...

August 22, 2025
Research on the Process of T832 State 6063 Aluminum Alloy Cylinder Tube

The market demand for 6063 aluminum alloy cylinder tubes in T832 condition is huge. Currently, only 6063 aluminum alloy cylinder tubes in T6 condition can be supplied in China. If they can be supplied in T832 condition, the potential of this alloy can be fully exploited. The mechanical properties of ...

August 22, 2025
The National Aluminium Company of India plans to increase the production of alumina and aluminium to meet domestic demand

According to foreign media reports, NALCO, the national aluminium company of India, is seeking to increase its production of alumina and aluminium through brownfield expansion in order to gain recognition from Maharatna. Brijendra Pratap Singh, chairman and managing director of NALCO, said ata press ...

August 20, 2025
The 2025 Jiangsu Top 100 Private Enterprises Series List has been released! Yuefeng Aluminum Group has topped both lists for the second consecutive year

On August 19th, the 2025 Jiangsu Top 100 Private Enterprises Series List was officially released. Yuefeng Aluminum Group Co., Ltd. topped the list of "Top 200 Private Enterprises in Jiangsu Province 2025" and "Top 100 Private Enterprises in Jiangsu Province in terms of Employment Absorption 2025". ...

August 20, 2025
The United States has included 407 types of steel and aluminum derivatives in the tariff list with an applicable tariff rate of 50%

According to CCTV News, on August 19 local time, the US Department of Commerce announced that 407 product categories would be included in the steel and aluminum tariff list, with an applicable tariff rate of 50%. The Ministry of Commerce stated that the newly added list covers a wide range of ...

August 20, 2025
The main defects on the extruded surface of aluminum materials and their elimination methods

There are numerous varieties and specifications of aluminum alloy profiles, with many production processes, complex technology and high requirements. Throughout the entire production process, including melting and casting, extrusion, heat treatment and finishing, surface treatment, storage, ...

August 19, 2025
According to national standards, the material requirements, wall thickness standards and tolerance ranges of aluminum profiles mainly follow the following norms, which are now classified and organized as follows!

Does the aluminum alloy guardrail on your balcony shake? Is the newly replaced aluminum alloy window with thermal break tightly closed? Behind these daily observations lies the profound knowledge of the national standards for aluminum profiles. From architectural doors and Windows to industrial ...

August 19, 2025
The low-altitude economy is booming! It is bringing structural growth opportunities to the aluminum profile industry. Combining industrial policies, technological demands and market dynamics, its core opportunities are mainly reflected in the following five major directions!

When drone swarps trace brilliant trails across the city's night sky, when eVTOL (Electric vertical take-off and landing Aircraft) completes its maiden flight at the test base, and when the prototype of a flying car makes its debut at an international auto show, an industrial revolution driven by ...

August 19, 2025
With the ebb of sentiment and the pressure from the fundamentals, the futures price of alumina rose sharply and then fell back

Recently, the futures price of alumina has risen sharply due to a notice from the Department of Natural Resources of Shanxi Province regarding the adjustment of the registration authority for the transfer of some mineral types. However, as the news of the disturbance at the mining end in Shanxi ...

August 18, 2025
The United States has announced the expansion of the scope of tariffs on imported steel and aluminum

The U.S. Department of Commerce stated in a Federal Register announcement released that evening that the Bureau of Industry and Security has added 407 product codes to the U.S. Harmonized Tariff Schedule, and these products will be subject to additional tariffs due to the steel and aluminum ...

August 18, 2025
Ge Honglin: Zhilian Nonferrous Metals' Digital Transformation will go deeper and more solid in the future

At present, a new round of global technological revolution and industrial transformation is accelerating. New technologies such as artificial intelligence, big data and industrial Internet are rapidly integrating with manufacturing, promoting the industrial system to leap from informatization to ...

August 15, 2025
The forging parts for a key aviation model of Yuefeng Aluminum were successfully delivered

On August 13th, the delivery ceremony of a key aviation model forging of Yuefeng Aluminum was held at the Huan Forging Plant. Company leaders, relevant departments and production plant managers attended the ceremony. The forging product for a key aviation model developed this time adopts the ring ...

August 15, 2025

6 7 9 10 Last Total 101 Pages