Up to 5 files, each 10M size is supported. OK
YueFeng Aluminium Technology Co., Ltd 86--186 6296 3676 sales@profiles-aluminum.com
News Get a Quote
Home - News - Jiangsu Yuefeng Aluminum Industry Group: building "aircraft Carrier Class"​ Aluminum Alloy processing material Project

Jiangsu Yuefeng Aluminum Industry Group: building "aircraft Carrier Class"​ Aluminum Alloy processing material Project

July 11, 2019

In the east of the Chuangye Road, the high-tech zone of Wuxi, there is a large-scale construction site which is surrounded by an iron fence and has a standard rectangle. This is the site of Jiangsu Yufeng aluminum alloy processing material project. The planned investment is about 3 billion yuan, with a total construction area of about 10 square kilometers, with a total construction area of about 10 million square meters. After the completion of the project, the annual sales revenue can reach 80 billion yuan to 10 billion yuan, and the annual tax revenue can reach 80 billion yuan to 1 billion yuan, and the employment post is about 17,000. As a "Big Mac" in the provincial "a hundred grand project", these amazing numbers are accelerating to become a factory, workshop, equipment, and product, boosting Wuxiundefineds new material industry to hundreds of millions.


"Summerundefineds Jiangsu Yufeng aluminum alloy processing material project site, excavator, loader, commercial pump truck, transport vehicle, crane. More than 200 large-size construction vehicles and large-scale equipment or shuttle, or wave-waving giant arm, and nearly 600 engineering technicians and construction management personnel from 7 construction units." The construction operators work together to sound the "the voice of summer" of large-scale project construction. Under the sun, the reporter went to the project site for a few minutes to see less than half of the area.


Chen Xiaopan, service director of Wuxi key industrial project promotion service group, who accompanied the reporter, said that the Wuxi Yuefeng aluminum alloy processing material project was pile-driven on January 7, road construction began on March 8, and plant foundation construction began on April 10. At present, pile foundation construction has been completed in the intensive processing area, 18 factories, 14 roads and rain drainage networks have been constructed at the same time, and 18 factories are all 16 meters high. Nine of them are 828 meters long and 90 meters wide, 8 buildings are 620 meters long and 90 meters wide, and 14 roads are nearly 19 kilometers long." the project plans to invest 2.1 billion yuan this year. As of June 10, the investment of 280 million yuan has been completed, and the construction of the ground beam of the factory building will soon begin."


It is understood that Jiangsu Yuefeng aluminum alloy processing project is divided into three parts. Among them, the plate and strip part plans to produce 1.2 million tons of aluminum alloy plate and strip annually, the main production equipment is imported hydraulic casting machine, hot rolling mill, cold rolling mill, aging furnace, sheet drawing machine, etc., the main products are transportation, aerospace industry rail bus plate, automobile plate, medium and heavy plate and household appliances, mechanical and electrical and other industries used aluminum alloy plate and strip; Some of the extrusion profiles plan to produce 500000 tons of aluminum alloy extrusion profiles annually, the main production equipment is 225MN150MN125MN75MN55MN36mn and other extruder a total of more than 60 sets, the main products are used in construction, automobile, aircraft, precision electronics and other fields; The intensive processing part plans to produce 200000 tons of aluminum alloy intensive processing products, the main equipment is imported double-gun automatic welding machine, bending machine, friction stir welding machine and so on. The main products are aluminum alloy building formwork, new energy car body, all-aluminum household products, rail vehicle body parts, special vehicle body and so on.


Chen Xiaowen told reporters that, by the end of the year, the construction of the steel structure of the 18 buildings has been completed, and some of the plants are fully closed, and the deep and deep processing zones will be completed and put into operation by the end of 2020. The extrusion section area is planned to start construction in April of 2020, and will be put into operation at the end of 2021; the plate strip area is planned to be started in 2021 and put into operation in 2023. At that time, the development of Wuxiundefineds economic transformation will form another "top beam and column".